Huangyan yichuan mold factory especially
in making:16 cavities preform mold. |
|
|||||||||||
|
||||
Usually, 16 cavities preform mold
does use the hot runner system rather than cold runner system, so the design
of hot runner system plays an important role in mold quality guarantee.
Based on foreign advanced techniques and combined with domestic clients'
demand, we adopt the valve gated design, in which each cavity has its own
heating zone and temperature is measured by independent thermocouple. (advantages:
Easily avoid some problems such as white or drawbench on bottom). Here,
16 cavities preform mold is produced automatically to reduce
labor force. |
|
|||
16 cavities preform mold
for PCO 1810. The weight of the preform is 53g, the preform is designed
for 2L CSD PET bottles . cycle time is 31 Sec with general PET screw type
of injection molding machine. The main components of molds ( die core,
die cavity and screw neck) are made by injection process, which are made
of special mold steel ( Germany steel 2316) after preheating treatment
in the original factory in Germany. In this way, the mold with long life
service and high quality can be used for 3 million shots without any maintenance,
meanwhile, the wall thickness between max. Parts and min. Part is not
more than 0.05mm. We adopt 16 cavities preform mold base
of 50# steel and sliding block of 718# steel. And the molds equipped with
imported components including high-qualitied lubricating copper plate,
Germany heaters HOTSET, Germany standard PID temperature controller. Moreover,
turning center processes make sure that every parts can match well; Proper
distribution of cooling water way improve productivity effect and molding
cycle only takes 15 seconds( need proper water chiller, bottle design
and injection machine) 16 cavities preform mold, designed and developed by our engineers, is of high precision and long life span without traditional problems. In a word, Preform wall thickness is on error of 0.05mm; Weight difference is less than 0.3g; 2-5 molds per minute; 3 million guarantee; Utmost 72 cavities in one mold. |
|
|||
1. There are 16 cavities on the mold.
2. Electric control system with simulating stretch testing improve yield rate. 3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mold concentricity. 4. The material of mold die core and die cavity are made of Sweden special mold steel. 5. International standard screw neck, imported nitrided steel with high hardness is of long usage. 6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products. 7. Valve gated type without tail reduces labor force. 8. At least 3 million guarantee. |
|
|||
keywords:16 cavities preform mold |
Huangyan Yichuan Mold Factory Copyright
2008-2020 www.preformmold.com
All Rights Reserved.. |